Cooling System Components

Cooling System Components

CAUTION!
Cover cap of expansion tank with rag and open carefully, as hot steam or hot coolant may escape when opening.

• When the engine is warm the cooling system is under pressure. If necessary release pressure before commencing repair work.

• Secure all hose connections using hose clamps appropriate for the model type.

• Hose clip pliers (V.A.G 1921) or spring-type clip pliers (VAS 5024 A) are recommended for installing spring-type clamps.

• Always replace gaskets and seals.

• Arrows on coolant pipes and coolant hoses must line up across from each other.