Subframe Mount Adjustment, Checking

Subframe Mount, Checking Adjustment

Procedure





- Release the EVAP canister - B arrow -, remove it upward - A arrow - and lay it aside.

Note:
^ Ignore - 1 and 2 -.





- Check dimensions on right mount for engine and transmission:

^ Both bolt heads - 2 - must be parallel to edge of engine mount support arm - 3 -.
^ A distance of - x - = 16 mm must be present between engine mount - 1 - and engine support - 4 -.

Note:
^ Distance - x - = 16 mm can also be checked with corresponding round stock.

- If the distance measured is too small or too large, the subframe must be adjusted.