09L, 6 Speed AWD A/T

Shift lock solenoid N110, removing and installing - 09L, 6 Speed AWD A/T

Removing

- Remove selector mechanism cover.





- Disconnect electrical connector at Shift lock solenoid N110.
- Release retainer and pull out Shift lock solenoid N110 from front - arrows -.





Installing

Installation is performed in reverse sequence. Note the following:

- Press Shift lock solenoid into guide until it engages. Actuating lever - 2 - for solenoid must engage in locking lever - 1 - on selector mechanism.
- Install selector mechanism cover.