Front Final Drive Gear Oil Level, Checking

Front final drive gear oil level, checking - 09L, 6 Speed AWD A/T

Special tools, testers and auxiliary items required





^ Drip tray V.A.G 1306
^ Safety goggles

Condition

^ Gear oil about 20 degrees C (room temperature)

Work sequence

- Drive vehicle onto a four-column lifting platform or over an inspection pit in order for it to be absolutely horizontal.
- Place drip tray V.A.G 1306 under the transmission.

CAUTION!
Wear safety goggles.





- Remove plug - arrow -.

^ Oil level must be up to lower edge of filler hole.

- Drain off any excess oil or top off to proper level.

Note:
^ The plug with seal must be replaced.

- Tighten new plug to 35 Nm.