Lumbar Support Adjustment Switch, Removing and Installing

Lumbar Support Adjustment Switch, Removing and Installing

Special tools, testers and auxiliary items required







- Engine and transmission holder VAS 6095







- Fixture for seat repair VAS 6136







Removing

- Remove seat.
- Mount the fixture for seat repair VAS 6136 on the engine and transmission holder VAS 6095.
- Attach the front seat to the fixture for seat repair VAS 6136.
- Remove side trim on sill side.
- Remove bolts - arrows -.
- Remove lumbar support adjustment switch - 1 -.

Installing

- Installation is reverse of removal, noting the following:

Tightening torque

Component Nm
Switch for lumbar support adjustment at side panel, door sill side 0.4