Four-Way Lumbar Support Switch, Removing and Installing

Four-Way Lumbar Support Switch, Removing and Installing

Special tools, testers and auxiliary items required







- Engine and transmission holder VAS 6095







- Fixture for seat repair VAS 6136







Removal

- Remove seat.
- Mount the fixture for seat repair VAS 6136 on the engine and transmission holder VAS 6095.
- Attach the front seat to the fixture for seat repair VAS 6136.
- Remove seat side trim on sill side.
- Remove bolts - 4 - (2x).
- Remove four-way lumbar support switch - 3 -.

Installing

Installation is reverse of removal. When doing so, note the following:
- Tightening torques for bolts - 4 - : 0.4 Nm