A/C Unit, Overview

Heating And A/C Unit, Disassembling And Assembling

- Removing add-on components from air conditioner.
- Removing heater elements and air guides from air conditioner.







1 - Bolt
2 - Intake housing
- Do not disassemble further
- With recirculated-air flap and two air flow/fresh-air flaps
3 - Bracket
- For evaporator refrigerant lines
4 - Air guide
- Consists of top and bottom section
5 - Evaporator
- Check for complete insulation at refrigerant lines
- Installing seal to evaporator.
- Check type of seal at connections and refrigerant lines (must be designed for same type of seal).
- The evaporator removed contains refrigerant oil which has to be returned to the refrigerant circuit.
6 - Evaporator seal
- Installing seal to evaporator.
7 - Air distributor housing
- Not to be disassembled
- With temperature flaps and air distributor flaps
- The coupling elements in the air distributor housing between temperature flaps 1 and temperature flaps 2 are visible after removing the air distributor housing.
8 - Footwell vents, front