Rear Door Window Weatherstrips, Gloss Package

Rear Door Window Weatherstrips, Gloss Package

- Cover area below weatherstrips - 1 - with adhesive tape - 2 -.





- Carefully bend up weatherstrips - 1 - slightly at rear - arrow -.





- Using a plastic wedge, pry off weatherstrips - 1 - from carrier part at sides.





- Carefully widen slightly the lower edge on inside of new weatherstrips - 1 - using a plastic wedge - 2 -.





- Coat this edge and carrier part with e.g. soap solution to assist installation.

- Insert weatherstrips - 1 - from above and carefully press weatherstrips completely onto carrier part by hand.