Driveshaft Assembly Overview

Driveshaft Assembly Overview





1 Rear final drive

2 Driveshaft

• Removing and installing, refer to => [ Driveshaft ] Driveshaft.

• Measuring radial run out and marking, refer to => [ Driveshaft Flange Measuring Radial Run Out and Marking ] Service and Repair.

3 Gasket

• Replace

• Detach protective foil and stick self adhesive side of the gasket onto flange shaft

• Degrease flange shaft

4 Shim

5 Bolt - 55 Nm

• Self locking

• Replace

• The tapped holes for the bolts in the flange shaft must always be cleaned (e.g. with a thread tap)

6 Bolt - 23 Nm

7 Transmission