Right Flange Shaft Seal

Right Flange Shaft Seal

Special tools, testers and auxiliary items required

• Drip tray (V.A.G 1306)

• Extractor lever (VW 681)

• Thrust piece (T10138)

Procedure

• Transmission installed.

• General repair notes. Refer to => [ General Repair Information ] General Repair Information.

• Rules of cleanliness for working on automatic transmissions. Refer to => [ Clean Working Conditions ] Clean Working Conditions.

- Place drip tray (V.A.G 1306) underneath transmission.

- Remove right flange shaft. Refer to => [ Right Flange Shaft ] Right Flange Shaft

- Remove flange shaft sealing ring.





- Coat outer circumference of gasket with gear oil.





- Drive in new shaft seal as far as stop without tilting it.

• Installation position: The open side of the seal faces the transmission.

- Fill area between sealing lip and dust lip halfway with sealing grease (G 052 128 A1).

- Install right flange shaft. Refer to => [ Right Flange Shaft ] Right Flange Shaft

- Check oil level in front final drive.