Flanged Shaft Oil Seal (Right Side), Replacing

Flanged shaft oil seal (right side), replacing - 09L, 6 Speed AWD A/T





Special tools, testers and auxiliary items required

^ Drip tray V.A.G 1306
^ Extractor lever VW 681
^ Thrust piece T10138

Procedure

^ Transmission installed

Note:
^ General repair instructions.
^ Read the rules for cleanliness when working on the automatic transmission.

- Place drip tray V.A.G 1306 under transmission.
- Remove flange shaft (right-side).





- Pull out flange shaft oil seal.





- Lubricate outer circumference of seal with gear oil
- Drive new seal in onto stop (take care to keep seal straight).

^ Installation position: open side of seal faces transmission.

- Pack space between sealing lip and dust lip half full with sealing grease G 052 128 A1.
- Install flange shaft (right-side).
- Check oil level in front final drive.