Door Safety and Entry Lamp

Door Safety and Entry Lamp

Removing





- Press retaining tab - 1 - in with a flat-head screwdriver and pry out door safety lamp or access lamp - 2 -.

- Disconnect electrical connector - 3 -.

- If equipped, carefully pry off cover on door safety lamp - arrow -.





- Remove bulb (12V, 5 W) on back of door safety lamp or access lamp from socket.

Installing

Install in reverse order of removal, observing the following:

- If present, install cover on door safety lamp.

- Connect electrical harness connector.

- Insert door safety lamp or access lamp into opening and engage on opposite side.