Backrest Cover and Cushion, Sport and Standard Seats

Backrest Cover and Cushion, Sport and Standard Seats

CAUTION!
For vehicles with side airbags, observe safety precautions for side airbags.

Cover and Cushion, Separating from Backrest Frame





1 - Backrest

• Removing

- Remove seat. Refer to => [ Seat ] Power Front Memory Seats.

- Mount the fixture for seat repair (VAS 6136) on the engine and transmission holder (VAS 6095).

- Attach the front seat to the fixture for seat repair (VAS 6136).

- Remove the backrest. Refer to => [ Front Backrest ] Power Front Memory Seats.

- Remove headrest. Refer to => [ Power Headrest ] Power Front Memory Seats.

- Remove headrest guides. Refer to => [ Headrest Guides ] Headrest Guides.

- Remove the entry assistance. Refer to => [ Entry Assistance ] Power Front Memory Seats.

- Remove backrest cover pane. Refer to => [ Backrest Cover ] Power Front Memory Seats.

- Pry out lower grip channels - 3 - (Qty. 3).

- Disengage side grip channels - 2 - (Qty. 2).

- Remove backrest frame. Refer to => [ Backrest Frame ] Power Front Memory Seats.

- Remove side airbag. Refer to => [ Power Seat Side Airbag ] Side Airbags, Servicing.

- Pry out plastic tabs - 4 - (Qty. 5).

- Remove cushion with cover.

• Installing

- To install, perform the steps used in removal in reverse order.

2 - Side Fastening Strips (Qty. 2)

3 - Lower Fastening Strips (Qty. 3)

4 - Plastic Tabs (Qty. 5)

Cover, Separating from Cushion





1 - Cover

• If the cover is new - 1 -, then the cover - 1 - must be cut around the backrest release.

• Removing

- Pry out grip channels - 4 - from plastic clips - 3 - using a screwdriver.

• Installing

- To install, perform the steps used in removal in reverse order.

- Replace damaged plastic clips.

2 - Cushion

3 - Plastic Clips

4 - Fastening Strips