Damping Mechanism For Glove Compartment Lid, Removing and Installing

Damping Mechanism For Glove Compartment Lid, Removing and Installing

Special tools and workshop equipment required

- Front end hook 3370

Removing

- Open glove compartment.







- Remove right instrument panel cover - arrow - using front end hook 3370.







- Disconnect connector - 2 -.
- Remove joint pin - 1 -.
- Unlock glove compartment lid damping mechanism - 3 - in clockwise direction and remove.

NOTE: Shown in illustration with glove box removed.

Installing

- Installation is in reverse order of removal.