CD Drive Control Module

CD Drive Control Module

Special tools, testers and auxiliary items required

• Radio Removal Tool (T10057)

- Turn off all electrical consumers.

- Remove ignition key.

Removing

- Open left luggage compartment storage bin.

- Insert two clips of Radio Removal Tool (T10057 ) into release slots of Navigation System with CD Drive Control Module (J401) until they engage. Points on grip eyes face outward.





- Remove Navigation System with CD Drive Control Module (J401) - 2 - from installation frame - 1 -.

- Disconnect the connectors on the Navigation System with CD Drive Control Module (J401).

- Remove the Radio Removal Tool (T10057) from the Navigation System with CD Drive Control Module (J401 ) while pressing on the locking straps on the Navigation System with CD Drive Control Module (J401).

Installing

- Connect all harness connectors.

- Slide Navigation System with CD Drive Control Module (J401) in until it engages in mounting frame.

- Perform adaptations on Navigation System with CD Drive Control Module (J401) Vehicle diagnosis, testing and information system VAS 5051.