Shift Lock Solenoid N110 (Through VIN 8E_6A156499), Removing and Installing

Shift Lock Solenoid N110 (through VIN 8E_6A156499), removing and installing - 01J, Continuously Variable Transmission (CVT)

Removing

- Remove cover for shift mechanism.
- Disconnect electrical harness connector on Shift Lock Solenoid N110.





- Release lugs and remove shift lock solenoid forward - arrows -.

Installing

Installation is in reverse order of removal, note the following:





- Press shift lock solenoid into guide until it engages; operating lever - 2 - of solenoid must engage in locking lever - 1 - on shift mechanism.
- Install cover for shift mechanism.