Shift Lock Solenoid N110 (From VIN 8E_6A156500), Removing and Installing

Shift Lock Solenoid N110 (from VIN 8E_6A156500), removing and installing - 01J, Continuously Variable Transmission (CVT)





Removing

- Remove cover for shift mechanism.
- Disconnect electrical harness connector on Shift Lock Solenoid N110.
- Press retaining hooks - A - into shift mechanism - arrow - and hold it down.

Note:
^ If retaining hook - A - is broken off, selector mechanism function unit must be replaced.





- Tip Shift Lock Solenoid N110 down and out in direction of - arrow - so that ball head - 1 - disengages from operating lever on shift mechanism.
- Remove Shift Lock Solenoid N110.

Installing

Installation is in reverse order of removal, note the following:

- Rotate ball head - 1 - to correct installation position.
- Guide Shift Lock Solenoid N110 diagonally from above into shift mechanism.
- Tip Shift Lock Solenoid N110 down in opposite direction of - arrow -.





- Ball head - 1 - must be completely engaged in operating lever on shift mechanism.
- Secure Shift Lock Solenoid N110 on retaining hook - A -.
- Install cover for shift mechanism.