Locking Cable (From VIN 8E_6A156500), Adjusting

Locking cable (from VIN 8E_6A156500), adjusting - 01J, Continuously Variable Transmission (CVT)

Special tools, testers and auxiliary items required





^ Adjustment pin for shift lock 3 3352 A
^ Safety glasses

Work preparations

Note:
^ The procedure described below will save you the effort of removing the center console.





- Cut through adjustment pin for shift lock 3 3352 A at rear end of flat area - arrow - using a cutting grinder.

CAUTION!
Wear eye protection.

- Order a new adjustment pin for shift lock as a replacement for other use.

Work procedure

- Position steering wheel column adjustment all the way and back toward drivers seat.
- Remove cover for shift mechanism.
- Remove ashtray in center console.
- Place selector lever in position "P".





- Loosen bolt - 1 -.

^ Support bracket - 2 - of locking cable must be movable by hand

- Insert adjustment pin for shift lock 3 3352 A between pin on locking cable lever and locking cable eye.
- Pull locking cable in direction of - arrow - and tighten bolt to 10 Nm.
- Remove adjustment pin.
- Check ignition key removal lock after every adjustment of locking cable.

Torque specification