Selector Shaft, Cleaning

Selector shaft, cleaning - 01J, Continuously Variable Transmission (CVT)

Note:
^ Rules of cleanliness for working on automatic transmissions.
^ General repair notes.

^ Transmission Control Module (TCM) J217 removed

Work procedure





- Clean catch - arrow - of selector shaft. Do not use fluffy materials for cleaning. Clean contact surfaces of magnet especially thoroughly of metal shavings and the like.

Note:
^ Make sure that spring - A - and roller - B - are secured properly.





- If necessary, clean sensors - A -, - C - and - D - of soiling and metal shavings.
- Install Transmission Control Module (TCM) J217.