Guide Link Bearing

Guide Link Bearing

Special tools, testers and auxiliary items required

• Assembly Tool (3301)

• Assembly Tool (3346)

• Assembly Tool (3347)

• Assembly Tool (3348)

Remove hydraulic mount at control arm

• Use protective covers when clamping aluminum control arms.





Installation position of hydro-mount

Arrow applied to hydraulic mount - 1 - points in joint pin direction.





The permissible deviation is ± 5°.

A = View - arrow A -

Pull in hydro-mount





- Insert hydro-mount - A - into special tool (3347/2).

- Tighten together with Front and Rear Bearing Tool (3348), spindle -3346/2- and hex nut.

- Pull in hydro-mount - A - until it stops.