Front Three-Point Seat Belt With Belt Tensioner

Front Three-Point Seat Belt with Belt Tensioner





1 - Belt Webbing Guide

2 - Belt Webbing

3 - Belt Latch Tongue

4 - Belt Roller/Belt Tensioner

• Removing

CAUTION!
Follow instructions for disconnecting the battery.

- Disconnect battery.

- Remove the rear bench seat. Refer to => [ Rear Bench Seat ] Rear Seats.

- Remove rear seat backrest. Refer to => [ Rear Seat Backrest ] Rear Seats.

- Remove side trim. Refer to => [ Rear Side Trim ] Rear Side Trim.

- Remove screw - 5 -.

- Disconnect the safety belt tensioner connector.

- Remove the outer floor assembly anchorage point - 6 -. Refer to => [ Outer Front Floor Assembly Anchorage Point ] Removal and Replacement.

- Unclip the belt webbing guide - 1 -.

- Pull the belt webbing - 2 - out of the belt webbing guide - 1 -.

- Remove belt roller - 4 -.

• Installing

- Install the front safety belt in reverse order of removal.

5 - Bolt

• Tightening specification 55 Nm.

6 - Outside Floor Assembly Anchorage Point

Disconnecting the Front Belt Webbing Tensioner Connector





- Remove the securing clip - 4 -.

- Remove connector - 3 -.