Shift Lock Solenoid - N110 -, Checking

Shift Lock Solenoid - N110 -, checking - 01J, Continuously Variable Transmission (CVT)

Note:
This test must be performed if the specified values in the voltage measurement are not reached.

Additional special tools and equipment





^ Connector test kit V.A.G 1594 A

Test sequence

- Remove cover for shift control mechanism





- Disconnect harness connector at Shift lock solenoid - N110 - - A -.
- Attach multimeter for resistance measurement between contacts - B -.
^ Specified value: 22.3 ±1 ohm

If the specified value is not reached:

- Replace the shift lock solenoid.