Fog Lamp, Audi A4, Replacing Bulb

Fog Lamp, Audi A4, Replacing Bulb

Removing

- Turn light switch to position "0".

CAUTION!
• Switch off all electrical consumers.

• Switch ignition off and remove ignition key.

Vehicles with charge air cooler:

- Remove front bumper cover Removal and Installation.

Vehicles without charge air cooler:

- Release fasteners - 1 - and - 2 - and remove front noise insulation.





All models:

- Disconnect electrical connection - 2 -.





- Turn bulb - 1 - counter-clockwise - arrow - and remove from housing.

Installing

Install in reverse order of removal, noting the following:

CAUTION!
• Do not touch glass portion of bulb with bare hands. Even the smallest amount of moisture and/or contaminants from fingers that evaporates on the bulb during operation can cause the glass to cloud over.

• When installing housing cover, ensure proper seating. Water intrusion will damage headlamp.

- Insert bulb and secure by turning in clockwise direction.

Vehicles with charge air cooler:

- Install front bumper cover Removal and Installation.

All models:

- Check and adjust fog lamps if necessary =>.