Brake Caliper Component Overview, FNR-G 60

Brake Caliper Component Overview, FNR-G 60

• Install the complete repair kit when servicing.

• Apply a thin coat of lithium grease (G 052 150 A2 ) to the brake cylinder, piston and seal.





1 - Brake carrier

• Bolts to brake caliper housing

2 - Guide pins, 30 Nm

3 - Dust cap

• Insert into the bushing

4 - Protective cap

• Push onto the bleeder valve

5 - Bleeder valve, 15 Nm

• Apply a thin coat of lithium grease (G 052 150 A2) before installing

6 - Bearing bushing

• Insert into the brake caliper housing

7 - Brake caliper housing

8 - Retaining spring

• Note correct installation position.

• Engage onto both brake caliper housing studs and onto the outer pad retaining spring.

9 - Protective seal

• Do not damage when inserting piston

• Apply a thin coat of lithium grease (G 052 150 A2)

10 - Piston

• Apply a thin coat of lithium grease (G 052 150 A2) to piston

11 - Seal

• Apply a thin coat of lithium grease (G 052 150 A2)