FNR-G60

Brake caliper, servicing

Note:
^ Install complete repair kit when servicing.
^ Apply thin coat of lithium grease G 052 150 A2 to brake cylinder, piston and seal.





1 - Brake carrier

^ Bolt to brake caliper housing

2 - Guide pins, 30 Nm

3 - Dust cap

^ Insert into bushing

4 - Protective cap

^ Push onto bleeder valve

5 - Bleeder valve, 15 Nm

^ Apply thin coat of lithium grease G 052 150 A2 before screwing in

6 - Bearing bushing

^ Insert into brake caliper housing

7 - Brake caliper housing

8 - Retaining spring

^ Note correct installation position.
^ Engage onto both brake caliper housing studs and onto outer pad retaining spring.

9 - Protective seal

^ Do not damage when inserting piston
^ Apply a thin coat of lithium grease G 052 150 A2

10 - Piston

^ Apply a thin coat of lithium grease G 052 150 A2 to piston

11 - Seal

^ Apply a thin coat of lithium grease G 052 150 A2