C54

Brake calipers, servicing

Note:
^ Install complete repair kit when servicing.
^ New brake calipers are filled with brake fluid and are pre-bled.
^ Apply thin coat of lithium grease G 052 150 A2 to brake cylinder, piston and seal.





1 - Dust cap

^ Push onto bleeder valve

2 - Bleeder valve

^ Apply thin coat of lithium grease G 052 150 A2 before screwing in

3 - Brake caliper housing

4 - Self-locking bolts, 30 Nm

^ Always replace
^ Counter-hold on guide pin when loosening and tightening

5 - Seal

6 - Piston

^ Apply a thin coat of lithium grease G 052 150 A2 to piston

7 - Protective seal

^ Do not damage when inserting piston

8 - Brake carrier with guide pins and protective caps

^ Replacement carriers are supplied assembled and with sufficient grease on guide pins