Brake Caliper Component Overview, Brembo

Brake Caliper Component Overview, Brembo

• Only use methylated spirits to clean brake parts.

• When carrying out repairs, install all parts supplied in the repair kit.

• New brake calipers are filled with brake fluid and pre-bled.

• Apply a thin coat of lithium grease (G 052 150 A2 ) to the brake cylinders, pistons and seals.





1 Dust cap

• Install onto the bleeder valve.

2 Bleeder valve, 12 Nm

• Apply a thin coat of lithium grease (G 052 150 A2 ) to the threads before installing.

3 Brake caliper housing

4 Seal, 32 mm piston

• Removing and installing, refer to => [ Caliper Piston, Brembo ] Caliper Piston, Brembo.

5 Seal, 28 mm piston

• Removing and installing, refer to => [ Caliper Piston, Brembo ] Caliper Piston, Brembo.

6 Piston, 32 mm

• Removing and installing, refer to => [ Caliper Piston, Brembo ] Caliper Piston, Brembo.

• Apply a thin coat of lithium grease (G 052 150 A2 ) to the piston beforehand

7 Piston, 28 mm

• Removing and installing, refer to => [ Caliper Piston, Brembo ] Caliper Piston, Brembo.

• Apply a thin coat of lithium grease (G 052 150 A2 ) to the piston beforehand

8 Protective cap for 32 mm piston

• Do not damage when inserting piston

9 Protective cap for 28 mm piston

• Do not damage when inserting piston

10 Support plate

11 Bolt, 6 Nm

12 Connecting line, 17 Nm