Seat Height Adjustment Motor, Assembly Overview

Seat Height Adjustment Motor, Assembly Overview

NOTE: If the motor is faulty, the top support of the seat pan must be replaced.







1 - Lumbar support adjustment motors (2x)
2 - Seat height adjustment motor

Removing
- Remove seat.
- Attach fixture for seat repair VAS 6136 to engine and transmission holder VAS 6095.
- Attach front seat to fixture for seat repair VAS 6136.
- Remove side trim, outboard side.
- Remove side trim, inboard side.
- Remove backrest.
- Remove cover and padding from seat pan.
- Remove control unit.
- Remove belt buckle.
- Remove spring pad with wiring harness from seat pan.
- Detach the upper seat pan support from the lower seat pan support.

3 - Seat inclination adjustment motor
4 - Forward and backward seat adjustment motor
5 - Backrest adjustment motor