Rear Lid Lock and Handle Mechanism, Removing and Installing

Rear Lid Lock And Handle Mechanism, Removing And Installing







1 - Rear lid lock
- To remove, unclip operating rod from swiveling bush and disengage.

2 - Swiveling bush
- After installing rear lid lock, engage operating rod and secure.

3 - Nut
- 8 Nm

4 - Operating rod
5 - Release
6 - Lock cylinder

- Removing:
- Disconnect electrical connectors.
- Disengage release from lock cylinder.
- Remove bolt.
- Twist lock cylinder 90 �.
- Remove lock cylinder from handle mechanism.

7 - Screw
- 8 Nm

8 - Motor
- Country versions

9 - Handle

- Removing:
- Remove rear lid trim.
- Remove lock cylinder.
- Remove bolts.
- Press in catches - arrows -.
- Remove grip piece.

10 - Nut
- 8 Nm