Front Hood Seal, Assembly Overview

Front Hood Seal (From Model Year 2006) - Assembly Overview







1 - Gasket for lock carrier
- Apply gasket at left and right on foam piece.
- When doing this, make sure it is applied without gaps.
- Compress excess length of gasket along lock carrier.

2 - Left sealing profile
- Self-adhering, adhesion surfaces must be free of dust and grease.

3 - Gasket for plenum chamber
- Apply gasket at left and right on foam piece.
- When doing this, make sure it is applied without gaps.
- Compress excess length of gasket along front panel of plenum chamber.