Fuel Door Release Actuator: Service and Repair

Fuel Tank Lid Unlock Motor





1. Motor for fuel tank lid unlock (V155)

2. Locking pin

3. Fuel filler flap

Removing





- Disconnect electrical connector.

- Loosen bolts - arrows - using Socket Wrench (T10010), slide actuator - 1 - up and remove.

Installing





- Before installing actuator, emergency release - 2 - must be slid over the locking pin.

- Locking pin of actuator must move cleanly into closed fuel filler flap - 2 -.

- Clip in grommets - 1 -.

• To remove fuel filler flap, remove bolts - 5 -.

• Panel gap dimensions => [ Panel gap dimensions ] Rear Lid.

Tightening torques => [ Comfort System Component Locations ] Locations.