Front Bumper Crossmember, Removing From Cover

Front Bumper Crossmember, Removing from Cover

- Bumper cover removed.

- Remove signal horn - 4 -.

- Disconnect hose - 5 - of headlamp cleaning system on both sides (press release buttons).





- Unscrew bolts - 3 - of right spray jet for headlamp cleaning system - spray jet remains installed.

- Remove bolts - 1 - (Qty. 5).

- Pry off retaining clips - 2 - (Qty. 3).

- Swivel spray jet for headlamp cleaning system to the side and remove crossmember from bumper cover.