Bumper Crossmember, Removing From Cover

Bumper Crossmember, Removing From Cover

- Bumper cover removed.
- Remove signal horn - 4 -.







- Disconnect hose - 5 - of headlamp cleaning system on both sides (press release buttons).
- Unscrew bolts - 3 - of right spray jet for headlamp cleaning system - spray jet remains installed.
- Remove bolts - 1 - (Qty. 5).
- Pry off retaining clips - 2 - (Qty. 3).
- Swivel spray jet for headlamp cleaning system to the side and remove crossmember from bumper cover.