Exhaust Camshaft Balance Shaft

Exhaust Camshaft Balance Shaft

Removing
- Remove the camshaft timing chain.
- Remove the balance shaft timing chain.





- Remove the exhaust camshaft balance shaft -1-.

Installing
^ Tightening specifications.





- Check the installation position of the pipe for the balance shaft -arrow-.

The pin -arrow- must engage in the groove.
- Lubricate the balance shaft bearing with engine oil.
- Install the intake camshaft balance shaft.

Further assembly is performed in the reverse order of removal, thereby observing the following:
- Install the balance shaft timing chain.
- Install camshaft timing chain.
- Install the lower timing chain cover.
- Install timing chain upper cover.
- Install the ribbed belt tensioner.
- Install ribbed belt.
- Adjust powertrain mount.