Seat Belt Guide Track: Service and Repair

Right And Left Rear Belt Guide Piece, Removing And Installing







1 - Rear belt guide piece

- Removal:
- Remove side upholstery.
- Remove C-pillar trim.
- Remove rear 3-point seat belt.
- If present, remove foam piece - 4 - from lower part of guide.
- Remove two Phillips-head bolts - 2 - from below.
- Remove belt guide piece - 1 -.

- Installing:
- When installing belt guide piece - 1 -, ensure both washers - 3 - lie below belt guide piece.
- Press belt guide piece into retainer so retaining tabs - 5 - engage audibly.
- Re-install Phillips-head bolts - 2 -.
- Lay foam piece - 4 - back into belt guide piece - 1 -.
- Re-install all additional removed parts.

2 - Phillips-head screws (Qty. 2)
3 - Washers (Qty. 2)
4 - Foam piece
- Depending on version
5 - Retaining tab