Rear Latch "Lower Anchor and Tethers For Children" Bracket, Removing and Installing

Rear LATCH "Lower Anchor and Tethers for CHildren" Bracket, Removing And Installing

Special tools, testers and auxiliary items required







- Torque wrench V.A.G 1331







1 - LATCH "Lower Anchor and Tethers for CHildren" bracket

- Removal:
- Remove rear seat bench: Vehicles through 10.04, vehicles from 11.04.
- Remove bolts - 2 - (Qty. 2).

- Installing:
Installation is reverse of removal. Observe the following when doing so:

- When installing fixed rear seat backrest, slide securing tabs behind the LATCH "Lower Anchor and Tethers for CHildren" bracket - 1 -.
- On some vehicles, when installing LATCH "Lower Anchor and Tethers for CHildren" bracket later, the securing tabs must be pressed flat in a vise to about 3 mm.
- When installing, ensure there is enough clearance to lap belt with retractor, rotate lap belt with retractor if necessary.

2 - Screws (4x)
- Tightening torque 30 Nm