Footwell Vents Front, Removing and Installing

Footwell Vents Front, Removing And Installing

Removing
- Remove glove compartment and center console.







- Remove support - A - for instrument panel cross member (on passengers side at transmission tunnel).







- Remove bolts - A - and - B - between support - C - and air conditioner.
- Remove support - C - for instrument panel cross member (on drivers side at transmission tunnel).
- Remove the two intermediate pieces to the rear footwell vent air guide.
- Mark the two connectors - A - and - B - to the Left Footwell Vent Temperature Sensor G261 and the Right Footwell Vent Temperature Sensor G262 (to avoid interchange).







- Disconnect connectors - A - and - B - from footwell vent temperature sensors.
- Remove bolts - C -.
- If applicable, remove wiring harness from footwell vent - D -.
- Pull footwell vent slightly to rear and remove it in direction of passengers footwell.

Installing







- Start by inserting lug - A - of footwell vent in mount of air conditioner - B -.
- Reinstall all components in reverse order.