Brake Caliper, Servicing

Brake caliper, servicing

Note:
^ Install complete repair kit when servicing.
^ Apply thin coat of lithium grease G 052 150 A2 to brake cylinder, piston and seal.





1 - Brake carrier
^ Bolt to brake caliper housing

2 - Guide pins, 30 Nm

3 - Dust cap
^ Insert into bushing

4 - Protective cap
^ Push onto bleeder valve

5 - Bleeder valve, 15 Nm
^ Apply thin coat of lithium grease G 052 150 A2 before screwing in

6 - Bearing bushing
^ Insert into brake caliper housing

7 - Brake caliper housing

8 - Retaining spring
^ Note correct installation position.
^ Engage onto both brake caliper housing studs and onto outer pad retaining spring.

9 - Protective seal
^ Do not damage when inserting piston
^ Apply a thin coat of lithium grease G 052 150 A2

10 - Piston
^ Apply a thin coat of lithium grease G 052 150 A2 to piston

11 - Seal
^ Apply a thin coat of lithium grease G 052 150 A2