Mirror Selector/Adjustment Switch, Removing and Installing

Mirror Selector/adjustment Switch, Removing And Installing

Mirror Adjustment Switch E43 , Mirror Selector Switch E48 , and Mirror (with fold-away function) Switch E168 (where applicable) are integrated into a single module.

Removing
- Remove front door trim.







- Disconnect electrical connection - 1 - at mirror adjustment switch - 2 - .
- Use small screwdriver to carefully release fasteners - arrows - .
- Pull mirror adjustment switch downwards out of door trim.

Installing
Install in reverse order of removal, noting the following:

NOTE: When installing, ensure symbol trim is inserted before the mirror adjustment switch.

- Press mirror adjustment switch into switch mounting until retaining hooks engage.
- Install front door trim.