Sun Visor

Sun Visor

Special tools, testers and auxiliary items required

• Torque Wrench (V.A.G 1783)









1 Sun Visor

• Removal:

- Disengage sun visor - 1 - in vehicle center from retaining hook - 2 -.

- Push sun visor - 1 - to the side.

- Pry out bolt cover - 3 - on sun visor - 1 - and remove bolt - 4 -.

- If present, disconnect make-up mirror lighting connector.

- Remove sun visor - 1 -.

• Installing:

To install, perform the steps used in removal in reverse order.

2 Sun Visor Center Bearing

3 Bolt Cover

4 Bolt

• Tightening specification 4 Nm

• self-locking

• replace after each disassembly

• Threaded holes for screws must always be cleaned (for example, with thread cutter)