Wiring Harness Routing on Rear Side or Molded Headliner Avant(Wagon)

Wiring Harness Routing On Rear Side Or Molded Headliner







1 - Rear side of molded headliner
Molded headliner removed (placed on seats).
- Disconnect connectors - 14 - and - 15 -.
- Unclip wiring harness - 3 - from cable channels - 2 -.
2 - Cable guide
3 - Cable harness
4 - Electrical connection
- For sun visor (for make-up lighting switch)
5 - Electrical connection
- For make-up lights
6 - Electrical connection
- For anti-theft warning system interior sensor
7 - Electrical connection
- For "Passenger Airbag-Off" light
8 - Electrical connection
- for sunroof motor
9 - Electrical connection
- for interior light/front reading light
10 - Electrical connection
- for hands-free microphone
11 - Electrical connection
- for automatic day/night rearview mirror
12 - Electrical connection
- for make-up lights
13 - Electrical connection
- for sun visor (for make-up lighting switch)
14 - Electrical connection
- for rear interior lights/reading lights
15 - Electrical connection
- for luggage compartment lights