Glove Compartment, With Knee Bolster

Glove Compartment, with Knee Bolster

Special tools, testers and auxiliary items required

• Special hook (3370)





• Torque Wrench (V.A.G 1410)









1 Glove Compartment

• Removal:

- Disconnect instrument panel cover - 3 -. Refer to => [ Removing Right Instrument Panel Cover ] Right Instrument Panel Cover

- Open glove compartment cover.

- Remove the bolts - 4 -.

- Remove glove compartment downward.

- Disconnect harness connectors to electrical components in glove compartment, if available.

• Installing:

To install, perform the steps used in removal in reverse order.

2 Instrument Panel

3 Instrument Panel Cover

• removing

4 Screws (Qty. 9)

• Tightening specification 5 Nm

Removing Right Instrument Panel Cover





- Pull off right instrument panel cover - arrow - with hook for front end (3370).