Shift Lock Solenoid N110 (Through VIN 8E_6A156499), Removing and Installing

Shift Lock Solenoid N110 (through VIN 8E_6A156499), removing and installing - 01J, Continuously Variable Transmission (CVT)

Removing
- Remove cover for shift mechanism.
- Disconnect electrical harness connector on Shift Lock Solenoid N110.





- Release lugs and remove shift lock solenoid forward -arrows-.

Installing
Installation is in reverse order of removal, note the following:





- Press shift lock solenoid into guide until it engages; operating lever -2- of solenoid must engage in locking lever -1- on shift mechanism.
- Install cover for shift mechanism.