01J, Continuously Variable Transmission (CVT)

ATF lines, ATF cooler and auxiliary ATF filter, servicing - 01J, Continuously Variable Transmission (CVT)

Note:
^ Refer to Rules of cleanliness for working on automatic transmissions.
^ Refer to General repair notes.
^ Always blow compressed air through ATF cooler and ATF lines (max. 10 mbar) and replace auxiliary ATF filter before installing a replacement transmission. If extremely dirty ATF flows out when blowing with compressed air, ATF cooler and ATF lines must also be flushed with clean ATF.
^ To install, first insert ATF lines into transmission or cooler by hand as far as they will go, then bolt on.
^ Check ATF level.