Shift Mechanism Cover (From VIN 8E_6A156500), Removing and Installing

Shift mechanism cover (from VIN 8E_6A156500), removing and installing - 01J, Continuously Variable Transmission (CVT)

Removing
- Remove selector lever handle.





- Open ashtray in center console and remove trim panel -arrows-.
- Remove 2 retaining bolts for ashtray and lift ashtray at rear.





- Release all 4 clips -arrows- and pull cover -1- with guide upwards to remove.
- Disconnect connector from the side of the guide plate.

Installing
Installation is in reverse order of removal, note the following:
- Install selector lever handle.