Gears, Hydraulic

Selector shaft, cleaning - 01J, Continuously Variable Transmission (CVT)

Note:
^ Refer to Rules of cleanliness for working on automatic transmissions.
^ Refer to General repair notes.

^ Transmission Control Module (TCM) J217 removed

Work procedure





- Clean catch -arrow- of selector shaft. Do not use fluffy materials for cleaning. Clean contact surfaces of magnet especially thoroughly of metal shavings and the like.

Note:
^ Make sure that spring -A- and roller -B- are secured properly.





- If necessary, clean sensors -A-, -C- and -D- of soiling and metal shavings.
- Install Transmission Control Module (TCM) J217.