01X, 6-Speed Front-Wheel Drive M/T

Over-center spring, removing and installing, 01X, 6-Speed Front-wheel Drive M/T

Special tools, testers and auxiliary items required





^ Assembly clamp T40025

Removing
- Remove storage compartment on drivers side.





- Tension over-center spring with clutch pedal, at the same time pressing on assembly clamp T40025.
- Move clutch pedal to rest position and remove over-center spring together with assembly clamp T40025 downward.

Installing
- Pull clutch pedal into the passenger compartment.

Installation position of over-center spring:

^ Black side of over-center spring points toward clutch pedal.
- Install over-center spring with assembly clamp T40025, operate clutch pedal and remove assembly clamp.