3-Pin Relay Carrier

3-Pin Relay Carrier

Removing





- Switch off ignition and remove ignition key.

- Remove instrument cluster. Refer to => [ Instrument Cluster ] Instrument Cluster.

- Remove driver's storage compartment.

- Remove the screws - 1 - through the opening in the instrument cluster and then remove the 3-pin relay carrier - 2 -.

- Unclip fuse panel at 3-pin relay carrier.

- Detach relays and control modules and then unclip appropriate relay carrier.

• Check the exact assignment of 3-pin relay carrier in the current wiring diagram Wiring diagrams, Troubleshooting & Component locations.

Installing

Install in reverse order of removal, observing the following:

- Install driver's storage compartment.

Tightening Specifications