Convertible Top Position Switch (Convertible Top Open Position Switch F171 / Convertible Top Closed Position Switch F202),

Convertible top position switch (Convertible Top Open Position Switch F171 / Convertible Top Closed Position Switch F202), removing







- Remove rear side trim.
- Disconnect electrical connector on Convertible Top Control Module J256.
- Remove convertible top cable from guides and cable ties for body wall and convertible top frame.







- Remove switch bolts - 1 -.
- Carefully remove convertible top position switch from bolting point mounts.

NOTE:
- The convertible top switch unit described is located on the right main guide.
- The convertible top should be brought to the appropriate position to remove respective convertible top switch unit bolt.