Convertible Top Locking Motor V223 / Convertible Top Lock Switch (Open) F294 / Convertible Top Lock Switch (Closed) F295,,

Convertible Top Locking Motor V223 / Convertible Top Lock Switch (open) F294 / Convertible Top Lock Switch (closed) F295, removing and installing

Removing







- Store convertible top in convertible top compartment.
- The convertible top compartment cover remains open.
- Remove front roof frame seal bolts. Carefully remove front rail trim.
- Remove ball joint wire fastener and press push rods from convertible top lock ball studs.
- Disconnect electrical connector.
- Mark exact position of convertible top latch on rail 1.
- Remove convertible top latch bolts and remove latch.

Installing
- Ensure convertible top latch is installed in the position marked earlier.

Further installation is performed in the reverse order of removal.
Adjust convertible top latch.